Skip to content
Free shipping within the USA on all orders over $50!
Metal Clay Supply
Silver & Gold
Penni Jo Molds
PPP & RAF
Fire & Dry
Tools & Videos
Mary Ann Devos
Thompson Enamel - Transparent - 2615 Periwinkle Blue - 1 oz.
Thompson Medium Temperature, Medium Expansion enamels are a glass product formulated to create a permanent bond with fine silver, copper, and gold. Bronze is not recommended for enameling.
These high quality, acid-resistant, 80-mesh enamels will provide rich, beautiful color for your metal clay work.
Thompson enamels are all lead-free!
See below for more information...
Our Price: $4.85
Sale Price: $
You'll earn 5
Email me when Back-In-Stock
The general firing range for Thompson enamels is 1400°–1500°F (760°–815°C). Enamels will fuse in 1 to 4 minutes depending on the color, type and thickness of the metal, and the temperature of the kiln. A typical firing is 1450°F (790°C) for around 2 minutes. Enamel powders will change in color after firing. Refer to the color image for a general indication of the fired result. Computer monitors do not accurately represent color, and enamel colors may vary slightly from batch to batch, so pre-testing your enamels before using them is recommended. Bronze is not recommended for enameling. The enamels are not formulated to adhere to it and will crack or chip off.
Color Specific Information:
Color: 2615 Periwinkle Blue
Metals: Recommended for fine copper, silver and gold
Recommended Firing Range: 1400°–1550°F (760°–845°C).
Firing: Consistent with general firing times.
COE: 322 cubic expansion
Grade: 80 Mesh
Color Code: (A) contains Cobalt
Additional Firing Notes:
These samples were produced on sheet metal. This color can be reactive, turing gray and cloudy when fired on metal clay. Test before commiting pieces. The copper sample shows how it looks fired over 1030 White, 2040 Clear and directly on copper. If fired directly or over clear the initial firing on should be 1550°F (845°C) to clear the oxides off the metal. The copper should appear clean and bright under the enamel If it appears reddish or mottled it wasn't fired hot enough and/or long enough. Refire at high temperture. Subsequent firings can be at lower temperatures.
©2013 - The color notes presented here are the intellectual property of Pam East and reproduction in whole or part in any form requires written permission.
Enamel Inlay Tool - Spatula
Pam East Adj. Enameling Trivet - Small
Pam East CounterNamel - Red
Wet-Dri Abrasive Paper Pack
Amethyst Cubic Zirconia
Weldbond Universal Adhesive - 5.4oz (160ml)
Share your knowledge of this product with other customers...
Be the first to write a review