Home > Finishing >

Thompson Enamel - Transparent - 2015 Golden Clear - 1 oz.
Thompson Enamel - Transparent -  2015 Golden Clear - 1 oz.

Additional Photos:

Thompson Medium Temperature, Medium Expansion enamels are a glass product formulated to create a permanent bond with fine silver, copper, and gold. Bronze is not recommended for enameling.

These high quality, acid-resistant, 80-mesh enamels will provide rich, beautiful color for your metal clay work.

Thompson enamels are all lead-free!

See below for more information...
Our Price: $4.50
Sale Price: $2.25
You'll earn 2 Rewards Points

Product Code:

Additional Information
Additional Information
The general firing range for Thompson enamels is 14001500F (760815C). Enamels will fuse in 1 to 4 minutes depending on the color, type and thickness of the metal, and the temperature of the kiln. A typical firing is 1450F (790C) for around 2 minutes. Enamel powders will change in color after firing. Refer to the color image for a general indication of the fired result. Computer monitors do not accurately represent color, and enamel colors may vary slightly from batch to batch, so pre-testing your enamels before using them is recommended. Bronze is not recommended for enameling. The enamels are not formulated to adhere to it and will crack or chip off.

Color Specific Information:
  • Color: 2015 Golden Clear
  • Metals: Recommended for fine copper, silver and gold
  • Recommended Firing Range: 14001550F (760845C).
  • Firing: Consistent with general firing times.
  • COE: 317 cubic expansion
  • Grade: 80 Mesh
  • Type: Transparent Color
  • Code: Standard Color
Additional firing notes:
2015 Golden Clear has a golden tint to it. Initial firing on copper should be 1550F (845C) to clear the oxides off the metal. The copper should appear clean and bright under the enamel If it appears reddish or mottled it wasn't fired hot enough and/or long enough.

2013 - The color notes presented here are the intellectual property of Pam East and reproduction in whole or part in any form requires written permission.

Share your knowledge of this product with other customers... Be the first to write a review