Home > Finishing >

Thompson Enamel - Opaque - 1820 Goldenrod Yellow - 1 oz.
Thompson Enamel - Opaque - 1820 Goldenrod Yellow - 1 oz.


 
Additional Photos:


Thompson Medium Temperature, Medium Expansion enamels are a glass product formulated to create a permanent bond with fine silver, copper, and gold. Bronze is not recommended for enameling.

These high quality, acid-resistant, 80-mesh enamels will provide rich, beautiful color for your metal clay work.

Thompson enamels are all lead-free!

See below for more information...
Our Price: $7.25
You'll earn 7 Rewards Points



Product Code:
1820_BASE
Qty:

Additional Information
 
Additional Information
The general firing range for Thompson enamels is 14001500F (760815C). Enamels will fuse in 1 to 4 minutes depending on the color, type and thickness of the metal, and the temperature of the kiln. A typical firing is 1450F (790C) for around 2 minutes. Enamel powders will change in color after firing. Refer to the color image for a general indication of the fired result. Computer monitors do not accurately represent color, and enamel colors may vary slightly from batch to batch, so pre-testing your enamels before using them is recommended. Bronze is not recommended for enameling. The enamels are not formulated to adhere to it and will crack or chip off.

Color Specific Information:
  • Color: 1820 Goldenrod Yellow
  • Metals: Recommended for fine copper and gold. Can be fired on silver with mitigation. See additional firing notes below.
  • Recommended Firing Range: 1350 - 1450F (730790C).
  • Firing: Additional firing time may be required.
  • COE: 279 cubic expansion
  • Grade: 80 Mesh
  • Type: Opaque
  • Color Code: (C) Contains Cadmium
Additional Firing Notes:
Cadmium colors will darken with prolonged firing. Edges are commonly black on copper and silver. Avoid over firing. This color does react with silver turning somewhat green at the edges, but the effect can be mitigated by fring over clear flux, either 2020 or 2040, and reducing kiln temperature to 1400(760C). A longer firing time will be needed. Watch enamel carefully to avoid over firing.


2013 - The color notes presented here are the intellectual property of Pam East and reproduction in whole or part in any form requires written permission.

Share your knowledge of this product with other customers... Be the first to write a review