Skip to content
Free shipping within the USA on all orders over $50!
Metal Clay Supply
Silver & Gold
Silver & Gold Accents
Penni Jo Molds
PPP & RAF
Fire & Dry
Color & Accents (by Ron Diegle)
Tools & Videos
Mary Ann Devos
Thompson Enamel - Opaque - 1693 Dark Blue - 1 oz.
Thompson Medium Temperature, Medium Expansion enamels are a glass product formulated to create a permanent bond with fine silver, copper, and gold. Bronze is not recommended for enameling.
These high quality, acid-resistant, 80-mesh enamels will provide rich, beautiful color for your metal clay work.
Thompson enamels are all lead-free!
See below for more information...
You'll earn 5
Email me when Back-In-Stock
The general firing range for Thompson enamels is 1400°–1500°F (760°–815°C). Enamels will fuse in 1 to 4 minutes depending on the color, type and thickness of the metal, and the temperature of the kiln. A typical firing is 1450°F (790°C) for around 2 minutes. Enamel powders will change in color after firing. Refer to the color image for a general indication of the fired result. Computer monitors do not accurately represent color, and enamel colors may vary slightly from batch to batch, so pre-testing your enamels before using them is recommended. Bronze is not recommended for enameling. The enamels are not formulated to adhere to it and will crack or chip off.
Color Specific Information:
Color: 1693 Dark Blue
Metals: Recommended for fine copper, silver and gold
Recommended Firing Range: Consistent with general firing range
Firing: Consistent with general firing times.
COE: 311 cubic expansion
Grade: 80 Mesh
Color Code: (A) Contains Cobalt
©2013 - The color notes presented here are the intellectual property of Pam East and reproduction in whole or part in any form requires written permission.
Jeweler's Rouge Cloth 6" x 8"
Gilders Paste - Primary - Canary Yellow
Hadar's Cold Inlay Powder - Black Color
Wet-Dri Abrasive Paper Pack
Alundum Stone - Medium - 240 Grit
Metal Clay Dryer
Thompson Enamel - Opaque - 1224 Melon Yellow - 1 oz.
Share your knowledge of this product with other customers...
Be the first to write a review