Free shipping on all orders within the USA!
For the best results, make sure your work surface, metal clay and template are lubricated with Hatties® NoStick or other lubricant. Hold the template firmly on the clay when cutting to maintain proper alignment. Always start with the cutouts FIRST, then proceed to the last outer perimeter cut.When working the cutouts, repeat the cut around the opening several times until you see the part to be removed moving around. Then use the QuikArt™ Stylus or needle tool to lift the part out of the cavity. You can then use the Stylus to smooth the inside of the opening.The last step is to carefully nick the template tabs free from your creation.Keep in mind that the part is delicate. Any corrective work you can do such as smoothing is done before the clay becomes bone dry. Use care performing any refining work in the bone dry state. It is highly recommended that cleanup, refining and finishing be done in the fired state.