Metal powder (pure copper), water and non-toxic binding materials.
• Shrinkage: 20%
• Firing Temp.:
Ramp at full speed to 1,700°F–1,800°F (927°C–982°C) and hold for 3 hours (total
firing time, including ramp-time, will be about 4 hours). Most firings perform
well at 1,700°F; however, if you discover that your pieces are not sintering
properly, try firing them at 1,800°F. If blistering occurs at 1,800°F, slightly
decrease the firing temperature. If you plan to enamel the piece, please follow
the recommended firing schedule listed in the included instructions.
Built with Volusion